- This topic has 85 replies, 8 voices, and was last updated 13 years, 7 months ago by ryphoenix.
-
AuthorPosts
-
October 2, 2010 at 5:34 PM #612921October 3, 2010 at 10:27 AM #612083UCGalParticipant
If you do go for the pressure test – make sure the pressure meter is pegged at zero before put on, and shows some value above zero when on.
I say that because we were burned by a broken meter… the meter showed a value (the same one the inspectors observed) even when it was disconnected… And, yes, we DID have a leak. It was a PITA to get SDG&E to confirm then get the contractor to fix it.
In other words – pay attention BEFORE the pressure test valve is put on to verify it’s in working order.
We got lucky – we were having a new meter installed (which SDG&E does) and they left the pressure valve there… so we could see it showed pressure when it wasn’t hooked up. We then monitored the meter and with no pilot lights, no draw – saw slow movement over time… a slow leak.
October 3, 2010 at 10:27 AM #612169UCGalParticipantIf you do go for the pressure test – make sure the pressure meter is pegged at zero before put on, and shows some value above zero when on.
I say that because we were burned by a broken meter… the meter showed a value (the same one the inspectors observed) even when it was disconnected… And, yes, we DID have a leak. It was a PITA to get SDG&E to confirm then get the contractor to fix it.
In other words – pay attention BEFORE the pressure test valve is put on to verify it’s in working order.
We got lucky – we were having a new meter installed (which SDG&E does) and they left the pressure valve there… so we could see it showed pressure when it wasn’t hooked up. We then monitored the meter and with no pilot lights, no draw – saw slow movement over time… a slow leak.
October 3, 2010 at 10:27 AM #612717UCGalParticipantIf you do go for the pressure test – make sure the pressure meter is pegged at zero before put on, and shows some value above zero when on.
I say that because we were burned by a broken meter… the meter showed a value (the same one the inspectors observed) even when it was disconnected… And, yes, we DID have a leak. It was a PITA to get SDG&E to confirm then get the contractor to fix it.
In other words – pay attention BEFORE the pressure test valve is put on to verify it’s in working order.
We got lucky – we were having a new meter installed (which SDG&E does) and they left the pressure valve there… so we could see it showed pressure when it wasn’t hooked up. We then monitored the meter and with no pilot lights, no draw – saw slow movement over time… a slow leak.
October 3, 2010 at 10:27 AM #612834UCGalParticipantIf you do go for the pressure test – make sure the pressure meter is pegged at zero before put on, and shows some value above zero when on.
I say that because we were burned by a broken meter… the meter showed a value (the same one the inspectors observed) even when it was disconnected… And, yes, we DID have a leak. It was a PITA to get SDG&E to confirm then get the contractor to fix it.
In other words – pay attention BEFORE the pressure test valve is put on to verify it’s in working order.
We got lucky – we were having a new meter installed (which SDG&E does) and they left the pressure valve there… so we could see it showed pressure when it wasn’t hooked up. We then monitored the meter and with no pilot lights, no draw – saw slow movement over time… a slow leak.
October 3, 2010 at 10:27 AM #613151UCGalParticipantIf you do go for the pressure test – make sure the pressure meter is pegged at zero before put on, and shows some value above zero when on.
I say that because we were burned by a broken meter… the meter showed a value (the same one the inspectors observed) even when it was disconnected… And, yes, we DID have a leak. It was a PITA to get SDG&E to confirm then get the contractor to fix it.
In other words – pay attention BEFORE the pressure test valve is put on to verify it’s in working order.
We got lucky – we were having a new meter installed (which SDG&E does) and they left the pressure valve there… so we could see it showed pressure when it wasn’t hooked up. We then monitored the meter and with no pilot lights, no draw – saw slow movement over time… a slow leak.
October 3, 2010 at 12:01 PM #612113ryphoenixParticipantWho performs pressure test, the inspectors?
October 3, 2010 at 12:01 PM #612199ryphoenixParticipantWho performs pressure test, the inspectors?
October 3, 2010 at 12:01 PM #612747ryphoenixParticipantWho performs pressure test, the inspectors?
October 3, 2010 at 12:01 PM #612864ryphoenixParticipantWho performs pressure test, the inspectors?
October 3, 2010 at 12:01 PM #613181ryphoenixParticipantWho performs pressure test, the inspectors?
October 3, 2010 at 12:45 PM #612123bearishgurlParticipant[quote=ryphoenix]Who performs pressure test, the inspectors?[/quote]
I’ve had this done before, ryphoenix, as well as a “trench inspection.” What typically happens that that your licensed plumber will perform the test in front of the SDGE inspector after any necessary work is completed. Their appts will be made to show up simultaneously. The SDGE inspector will sign off on the spot if they are satisfied.
October 3, 2010 at 12:45 PM #612209bearishgurlParticipant[quote=ryphoenix]Who performs pressure test, the inspectors?[/quote]
I’ve had this done before, ryphoenix, as well as a “trench inspection.” What typically happens that that your licensed plumber will perform the test in front of the SDGE inspector after any necessary work is completed. Their appts will be made to show up simultaneously. The SDGE inspector will sign off on the spot if they are satisfied.
October 3, 2010 at 12:45 PM #612757bearishgurlParticipant[quote=ryphoenix]Who performs pressure test, the inspectors?[/quote]
I’ve had this done before, ryphoenix, as well as a “trench inspection.” What typically happens that that your licensed plumber will perform the test in front of the SDGE inspector after any necessary work is completed. Their appts will be made to show up simultaneously. The SDGE inspector will sign off on the spot if they are satisfied.
October 3, 2010 at 12:45 PM #612874bearishgurlParticipant[quote=ryphoenix]Who performs pressure test, the inspectors?[/quote]
I’ve had this done before, ryphoenix, as well as a “trench inspection.” What typically happens that that your licensed plumber will perform the test in front of the SDGE inspector after any necessary work is completed. Their appts will be made to show up simultaneously. The SDGE inspector will sign off on the spot if they are satisfied.
-
AuthorPosts
- You must be logged in to reply to this topic.