- This topic has 155 replies, 20 voices, and was last updated 12 years, 10 months ago by ocrenter.
-
AuthorPosts
-
January 4, 2011 at 8:45 PM #649090January 4, 2011 at 8:57 PM #647977ScarlettParticipant
[quote=sdrealtor]Scarlett
Not to minimize what you personally experienced but even though this is California the last meaningful earthquake in SD County was well before the life of anyone still alive or their parents/grandparents for that matter.[/quote]But the chances get higher as time passes. Several faults are overdue for a big one (at least as much as the scientists can tell). Actually, I’d feel better if a big one had alread happened in the last 50-100 years alleviating the tensions between the plates.
January 4, 2011 at 8:57 PM #648048ScarlettParticipant[quote=sdrealtor]Scarlett
Not to minimize what you personally experienced but even though this is California the last meaningful earthquake in SD County was well before the life of anyone still alive or their parents/grandparents for that matter.[/quote]But the chances get higher as time passes. Several faults are overdue for a big one (at least as much as the scientists can tell). Actually, I’d feel better if a big one had alread happened in the last 50-100 years alleviating the tensions between the plates.
January 4, 2011 at 8:57 PM #648634ScarlettParticipant[quote=sdrealtor]Scarlett
Not to minimize what you personally experienced but even though this is California the last meaningful earthquake in SD County was well before the life of anyone still alive or their parents/grandparents for that matter.[/quote]But the chances get higher as time passes. Several faults are overdue for a big one (at least as much as the scientists can tell). Actually, I’d feel better if a big one had alread happened in the last 50-100 years alleviating the tensions between the plates.
January 4, 2011 at 8:57 PM #648771ScarlettParticipant[quote=sdrealtor]Scarlett
Not to minimize what you personally experienced but even though this is California the last meaningful earthquake in SD County was well before the life of anyone still alive or their parents/grandparents for that matter.[/quote]But the chances get higher as time passes. Several faults are overdue for a big one (at least as much as the scientists can tell). Actually, I’d feel better if a big one had alread happened in the last 50-100 years alleviating the tensions between the plates.
January 4, 2011 at 8:57 PM #649095ScarlettParticipant[quote=sdrealtor]Scarlett
Not to minimize what you personally experienced but even though this is California the last meaningful earthquake in SD County was well before the life of anyone still alive or their parents/grandparents for that matter.[/quote]But the chances get higher as time passes. Several faults are overdue for a big one (at least as much as the scientists can tell). Actually, I’d feel better if a big one had alread happened in the last 50-100 years alleviating the tensions between the plates.
January 5, 2011 at 8:29 AM #648037UCGalParticipant[quote=Rustico]sorry,blew that.
It was for UCGalJust something you might find interesting, UCGAL.
Code in the county jurisdiction(or at least parts of it)calls for self sealing vents. If you or your husband haven’t seen them, they have a honeycomb behind the 1/4 mesh that is suppose to melt closed in a fire.[/quote]
Interesting. I’ll definitely pass this on to him. For now we’ve just been replacing with insect size stainless steel. (Vs the bird size aluminum that was there.) When we were building the companion unit we had to get everything past the fire marshal because we’re within X feet of the fire zone. Having the smaller mesh means embers can’t get in. But having it melt close is even better.[quote=Rustico]Watch out for signs that a house has been enhanced or optimized with modification sans concern for structural integrity.
I saw a place recently where a nook was cut into the garage to expand the kitchen by sinking the fridge into the wall. It was the only ” wall below” that could possibly carry sheer strength to the second story and there was little to nothing left of it.[/quote]
I’ve seen similar – and no regard for the fact that they’d destroyed the fire rating between garage and kitchen.January 5, 2011 at 8:29 AM #648109UCGalParticipant[quote=Rustico]sorry,blew that.
It was for UCGalJust something you might find interesting, UCGAL.
Code in the county jurisdiction(or at least parts of it)calls for self sealing vents. If you or your husband haven’t seen them, they have a honeycomb behind the 1/4 mesh that is suppose to melt closed in a fire.[/quote]
Interesting. I’ll definitely pass this on to him. For now we’ve just been replacing with insect size stainless steel. (Vs the bird size aluminum that was there.) When we were building the companion unit we had to get everything past the fire marshal because we’re within X feet of the fire zone. Having the smaller mesh means embers can’t get in. But having it melt close is even better.[quote=Rustico]Watch out for signs that a house has been enhanced or optimized with modification sans concern for structural integrity.
I saw a place recently where a nook was cut into the garage to expand the kitchen by sinking the fridge into the wall. It was the only ” wall below” that could possibly carry sheer strength to the second story and there was little to nothing left of it.[/quote]
I’ve seen similar – and no regard for the fact that they’d destroyed the fire rating between garage and kitchen.January 5, 2011 at 8:29 AM #648694UCGalParticipant[quote=Rustico]sorry,blew that.
It was for UCGalJust something you might find interesting, UCGAL.
Code in the county jurisdiction(or at least parts of it)calls for self sealing vents. If you or your husband haven’t seen them, they have a honeycomb behind the 1/4 mesh that is suppose to melt closed in a fire.[/quote]
Interesting. I’ll definitely pass this on to him. For now we’ve just been replacing with insect size stainless steel. (Vs the bird size aluminum that was there.) When we were building the companion unit we had to get everything past the fire marshal because we’re within X feet of the fire zone. Having the smaller mesh means embers can’t get in. But having it melt close is even better.[quote=Rustico]Watch out for signs that a house has been enhanced or optimized with modification sans concern for structural integrity.
I saw a place recently where a nook was cut into the garage to expand the kitchen by sinking the fridge into the wall. It was the only ” wall below” that could possibly carry sheer strength to the second story and there was little to nothing left of it.[/quote]
I’ve seen similar – and no regard for the fact that they’d destroyed the fire rating between garage and kitchen.January 5, 2011 at 8:29 AM #648831UCGalParticipant[quote=Rustico]sorry,blew that.
It was for UCGalJust something you might find interesting, UCGAL.
Code in the county jurisdiction(or at least parts of it)calls for self sealing vents. If you or your husband haven’t seen them, they have a honeycomb behind the 1/4 mesh that is suppose to melt closed in a fire.[/quote]
Interesting. I’ll definitely pass this on to him. For now we’ve just been replacing with insect size stainless steel. (Vs the bird size aluminum that was there.) When we were building the companion unit we had to get everything past the fire marshal because we’re within X feet of the fire zone. Having the smaller mesh means embers can’t get in. But having it melt close is even better.[quote=Rustico]Watch out for signs that a house has been enhanced or optimized with modification sans concern for structural integrity.
I saw a place recently where a nook was cut into the garage to expand the kitchen by sinking the fridge into the wall. It was the only ” wall below” that could possibly carry sheer strength to the second story and there was little to nothing left of it.[/quote]
I’ve seen similar – and no regard for the fact that they’d destroyed the fire rating between garage and kitchen.January 5, 2011 at 8:29 AM #649155UCGalParticipant[quote=Rustico]sorry,blew that.
It was for UCGalJust something you might find interesting, UCGAL.
Code in the county jurisdiction(or at least parts of it)calls for self sealing vents. If you or your husband haven’t seen them, they have a honeycomb behind the 1/4 mesh that is suppose to melt closed in a fire.[/quote]
Interesting. I’ll definitely pass this on to him. For now we’ve just been replacing with insect size stainless steel. (Vs the bird size aluminum that was there.) When we were building the companion unit we had to get everything past the fire marshal because we’re within X feet of the fire zone. Having the smaller mesh means embers can’t get in. But having it melt close is even better.[quote=Rustico]Watch out for signs that a house has been enhanced or optimized with modification sans concern for structural integrity.
I saw a place recently where a nook was cut into the garage to expand the kitchen by sinking the fridge into the wall. It was the only ” wall below” that could possibly carry sheer strength to the second story and there was little to nothing left of it.[/quote]
I’ve seen similar – and no regard for the fact that they’d destroyed the fire rating between garage and kitchen.January 5, 2011 at 9:25 AM #648057MyriadParticipantDoes this mean that we get to rebuild large parts of LA so the city layout is not so stupid as it is now?
January 5, 2011 at 9:25 AM #648129MyriadParticipantDoes this mean that we get to rebuild large parts of LA so the city layout is not so stupid as it is now?
January 5, 2011 at 9:25 AM #648714MyriadParticipantDoes this mean that we get to rebuild large parts of LA so the city layout is not so stupid as it is now?
January 5, 2011 at 9:25 AM #648851MyriadParticipantDoes this mean that we get to rebuild large parts of LA so the city layout is not so stupid as it is now?
-
AuthorPosts
- You must be logged in to reply to this topic.