Crown molding cost and good contractor in San Diego

[an]

[quote=njtosd][quote=LAAFTERHOURS]
. . .
As others have mentioned, this stuff isnt difficult to install or cut. The biggest issue i have is lack of truck to pickup 16 foot lengths. If I had a means to pickup the material, I would probably finish the house myself considering I have every tool required to do the job. All i would need is some beer to provide to a friend with an arm to hold it up while my nail gun fires it into place.[/quote]

I’m not sure, but won’t most places deliver (for a charge)?[/quote]
Yes. But the delivery charge is expensive enough that it would only make sense if you plan out your whole house and order all at once. They also have minimum a mount you have to buy in order for them to deliver. When I bought my house, my garage was full of doors and moldings. Shipping charge turns out to be ~$100 for a little over $1k worth of doors and moldings.

[jimmyle]

I just got a quote for around $1,400 for (6″ crown + labor and paint included) for my whole 1826 sq ft single story house.

My house has high ceilings even in the bedrooms and there are many weird angles. I think I will hire this guy rather than do it myself.

With the cost of buying materials at around $700 (more waste when I do it) + $100 for delivery and paint. I think the extra $600 is worth it because he will do a much better job that I can.

[jimmyle]

I just got a quote for around $1,400 for (6″ crown + labor and paint included) for my whole 1826 sq ft single story house.

My house has high ceilings even in the bedrooms and there are many weird angles. I think I will hire this guy rather than do it myself.

With the cost of buying materials at around $700 (more waste when I do it) + $100 for delivery and paint. I think the extra $600 is worth it because he will do a much better job that I can.

[jimmyle]

I just got a quote for around $1,400 for (6″ crown + labor and paint included) for my whole 1826 sq ft single story house.

My house has high ceilings even in the bedrooms and there are many weird angles. I think I will hire this guy rather than do it myself.

With the cost of buying materials at around $700 (more waste when I do it) + $100 for delivery and paint. I think the extra $600 is worth it because he will do a much better job that I can.

[jimmyle]

I just got a quote for around $1,400 for (6″ crown + labor and paint included) for my whole 1826 sq ft single story house.

My house has high ceilings even in the bedrooms and there are many weird angles. I think I will hire this guy rather than do it myself.

With the cost of buying materials at around $700 (more waste when I do it) + $100 for delivery and paint. I think the extra $600 is worth it because he will do a much better job that I can.

[jimmyle]

I just got a quote for around $1,400 for (6″ crown + labor and paint included) for my whole 1826 sq ft single story house.

My house has high ceilings even in the bedrooms and there are many weird angles. I think I will hire this guy rather than do it myself.

With the cost of buying materials at around $700 (more waste when I do it) + $100 for delivery and paint. I think the extra $600 is worth it because he will do a much better job that I can.

[an]

[quote=jimmyle]I just got a quote for around $1,400 for (6″ crown + labor and paint included) for my whole 1826 sq ft single story house.

My house has high ceilings even in the bedrooms and there are many weird angles. I think I will hire this guy rather than do it myself.

With the cost of buying materials at around $700 (more waste when I do it) + $100 for delivery and paint. I think the extra $600 is worth it because he will do a much better job that I can.[/quote]
Where did you get $700 for materials from? My house is bigger than yours and I think I spent about $400 tops for crown. Lets assume a 10×10 bedroom, that’s 100 sq-ft but only 40 linear foot. A 20×20 living room is 400 sq-ft but only 80 linear foot. I think I spent no more than $1000 in molding materials for doors/windows casings, baseboards, wainscotting, chair rails, & crown. This is for a house that’s bigger than yours as well.

[an]

[quote=jimmyle]I just got a quote for around $1,400 for (6″ crown + labor and paint included) for my whole 1826 sq ft single story house.

My house has high ceilings even in the bedrooms and there are many weird angles. I think I will hire this guy rather than do it myself.

With the cost of buying materials at around $700 (more waste when I do it) + $100 for delivery and paint. I think the extra $600 is worth it because he will do a much better job that I can.[/quote]
Where did you get $700 for materials from? My house is bigger than yours and I think I spent about $400 tops for crown. Lets assume a 10×10 bedroom, that’s 100 sq-ft but only 40 linear foot. A 20×20 living room is 400 sq-ft but only 80 linear foot. I think I spent no more than $1000 in molding materials for doors/windows casings, baseboards, wainscotting, chair rails, & crown. This is for a house that’s bigger than yours as well.

[an]

[quote=jimmyle]I just got a quote for around $1,400 for (6″ crown + labor and paint included) for my whole 1826 sq ft single story house.

My house has high ceilings even in the bedrooms and there are many weird angles. I think I will hire this guy rather than do it myself.

With the cost of buying materials at around $700 (more waste when I do it) + $100 for delivery and paint. I think the extra $600 is worth it because he will do a much better job that I can.[/quote]
Where did you get $700 for materials from? My house is bigger than yours and I think I spent about $400 tops for crown. Lets assume a 10×10 bedroom, that’s 100 sq-ft but only 40 linear foot. A 20×20 living room is 400 sq-ft but only 80 linear foot. I think I spent no more than $1000 in molding materials for doors/windows casings, baseboards, wainscotting, chair rails, & crown. This is for a house that’s bigger than yours as well.

[an]

[quote=jimmyle]I just got a quote for around $1,400 for (6″ crown + labor and paint included) for my whole 1826 sq ft single story house.

My house has high ceilings even in the bedrooms and there are many weird angles. I think I will hire this guy rather than do it myself.

With the cost of buying materials at around $700 (more waste when I do it) + $100 for delivery and paint. I think the extra $600 is worth it because he will do a much better job that I can.[/quote]
Where did you get $700 for materials from? My house is bigger than yours and I think I spent about $400 tops for crown. Lets assume a 10×10 bedroom, that’s 100 sq-ft but only 40 linear foot. A 20×20 living room is 400 sq-ft but only 80 linear foot. I think I spent no more than $1000 in molding materials for doors/windows casings, baseboards, wainscotting, chair rails, & crown. This is for a house that’s bigger than yours as well.

[an]

[quote=jimmyle]I just got a quote for around $1,400 for (6″ crown + labor and paint included) for my whole 1826 sq ft single story house.

My house has high ceilings even in the bedrooms and there are many weird angles. I think I will hire this guy rather than do it myself.

With the cost of buying materials at around $700 (more waste when I do it) + $100 for delivery and paint. I think the extra $600 is worth it because he will do a much better job that I can.[/quote]
Where did you get $700 for materials from? My house is bigger than yours and I think I spent about $400 tops for crown. Lets assume a 10×10 bedroom, that’s 100 sq-ft but only 40 linear foot. A 20×20 living room is 400 sq-ft but only 80 linear foot. I think I spent no more than $1000 in molding materials for doors/windows casings, baseboards, wainscotting, chair rails, & crown. This is for a house that’s bigger than yours as well.

[jimmyle]

I need about 350 feet + 70 feet scraps. At $1.6 per linear feet, it is $700. I think you mentioned $1 a feet but I have not seen any thing decent under $1.5. I need to check your place out.

[quote=AN][quote=jimmyle]I just got a quote for around $1,400 for (6″ crown + labor and paint included) for my whole 1826 sq ft single story house.

My house has high ceilings even in the bedrooms and there are many weird angles. I think I will hire this guy rather than do it myself.

With the cost of buying materials at around $700 (more waste when I do it) + $100 for delivery and paint. I think the extra $600 is worth it because he will do a much better job that I can.[/quote]
Where did you get $700 for materials from? My house is bigger than yours and I think I spent about $400 tops for crown. Lets assume a 10×10 bedroom, that’s 100 sq-ft but only 40 linear foot. A 20×20 living room is 400 sq-ft but only 80 linear foot. I think I spent no more than $1000 in molding materials for doors/windows casings, baseboards, wainscotting, chair rails, & crown. This is for a house that’s bigger than yours as well.[/quote]

[jimmyle]

I need about 350 feet + 70 feet scraps. At $1.6 per linear feet, it is $700. I think you mentioned $1 a feet but I have not seen any thing decent under $1.5. I need to check your place out.

[quote=AN][quote=jimmyle]I just got a quote for around $1,400 for (6″ crown + labor and paint included) for my whole 1826 sq ft single story house.

My house has high ceilings even in the bedrooms and there are many weird angles. I think I will hire this guy rather than do it myself.

With the cost of buying materials at around $700 (more waste when I do it) + $100 for delivery and paint. I think the extra $600 is worth it because he will do a much better job that I can.[/quote]
Where did you get $700 for materials from? My house is bigger than yours and I think I spent about $400 tops for crown. Lets assume a 10×10 bedroom, that’s 100 sq-ft but only 40 linear foot. A 20×20 living room is 400 sq-ft but only 80 linear foot. I think I spent no more than $1000 in molding materials for doors/windows casings, baseboards, wainscotting, chair rails, & crown. This is for a house that’s bigger than yours as well.[/quote]

[jimmyle]

I need about 350 feet + 70 feet scraps. At $1.6 per linear feet, it is $700. I think you mentioned $1 a feet but I have not seen any thing decent under $1.5. I need to check your place out.

[quote=AN][quote=jimmyle]I just got a quote for around $1,400 for (6″ crown + labor and paint included) for my whole 1826 sq ft single story house.

My house has high ceilings even in the bedrooms and there are many weird angles. I think I will hire this guy rather than do it myself.

With the cost of buying materials at around $700 (more waste when I do it) + $100 for delivery and paint. I think the extra $600 is worth it because he will do a much better job that I can.[/quote]
Where did you get $700 for materials from? My house is bigger than yours and I think I spent about $400 tops for crown. Lets assume a 10×10 bedroom, that’s 100 sq-ft but only 40 linear foot. A 20×20 living room is 400 sq-ft but only 80 linear foot. I think I spent no more than $1000 in molding materials for doors/windows casings, baseboards, wainscotting, chair rails, & crown. This is for a house that’s bigger than yours as well.[/quote]

[jimmyle]

I need about 350 feet + 70 feet scraps. At $1.6 per linear feet, it is $700. I think you mentioned $1 a feet but I have not seen any thing decent under $1.5. I need to check your place out.

[quote=AN][quote=jimmyle]I just got a quote for around $1,400 for (6″ crown + labor and paint included) for my whole 1826 sq ft single story house.

My house has high ceilings even in the bedrooms and there are many weird angles. I think I will hire this guy rather than do it myself.

With the cost of buying materials at around $700 (more waste when I do it) + $100 for delivery and paint. I think the extra $600 is worth it because he will do a much better job that I can.[/quote]
Where did you get $700 for materials from? My house is bigger than yours and I think I spent about $400 tops for crown. Lets assume a 10×10 bedroom, that’s 100 sq-ft but only 40 linear foot. A 20×20 living room is 400 sq-ft but only 80 linear foot. I think I spent no more than $1000 in molding materials for doors/windows casings, baseboards, wainscotting, chair rails, & crown. This is for a house that’s bigger than yours as well.[/quote]

[Author]

Posts