- This topic has 65 replies, 10 voices, and was last updated 14 years, 1 month ago by george.
-
AuthorPosts
-
March 31, 2010 at 2:46 PM #534734April 1, 2010 at 10:48 AM #534040georgeParticipant
If the light you are referring to is 120V underwater pool light, then be careful how the faulty wiring is repaired. You are not allowed by California building code to splice the the electrical ground wire connecting the underwater pool light to the electrical breaker panel. You must have a single continous ground wire. Not sure how a kink would interuppt electrical flow, but if the ground wire is severed or broken you won’t be able to legally add on a piece of wire between the break point and the light. It’s not just splicing with your your standard twist on connectors that’s prohibited, you can’t solder or permanantly crimp the wire either. You would have to run a new continuous ground wire from the light to the breaker panel and that could be extremely difficult. That’s my understanding, confirm with a licensed electrician.
April 1, 2010 at 10:48 AM #534167georgeParticipantIf the light you are referring to is 120V underwater pool light, then be careful how the faulty wiring is repaired. You are not allowed by California building code to splice the the electrical ground wire connecting the underwater pool light to the electrical breaker panel. You must have a single continous ground wire. Not sure how a kink would interuppt electrical flow, but if the ground wire is severed or broken you won’t be able to legally add on a piece of wire between the break point and the light. It’s not just splicing with your your standard twist on connectors that’s prohibited, you can’t solder or permanantly crimp the wire either. You would have to run a new continuous ground wire from the light to the breaker panel and that could be extremely difficult. That’s my understanding, confirm with a licensed electrician.
April 1, 2010 at 10:48 AM #534625georgeParticipantIf the light you are referring to is 120V underwater pool light, then be careful how the faulty wiring is repaired. You are not allowed by California building code to splice the the electrical ground wire connecting the underwater pool light to the electrical breaker panel. You must have a single continous ground wire. Not sure how a kink would interuppt electrical flow, but if the ground wire is severed or broken you won’t be able to legally add on a piece of wire between the break point and the light. It’s not just splicing with your your standard twist on connectors that’s prohibited, you can’t solder or permanantly crimp the wire either. You would have to run a new continuous ground wire from the light to the breaker panel and that could be extremely difficult. That’s my understanding, confirm with a licensed electrician.
April 1, 2010 at 10:48 AM #534722georgeParticipantIf the light you are referring to is 120V underwater pool light, then be careful how the faulty wiring is repaired. You are not allowed by California building code to splice the the electrical ground wire connecting the underwater pool light to the electrical breaker panel. You must have a single continous ground wire. Not sure how a kink would interuppt electrical flow, but if the ground wire is severed or broken you won’t be able to legally add on a piece of wire between the break point and the light. It’s not just splicing with your your standard twist on connectors that’s prohibited, you can’t solder or permanantly crimp the wire either. You would have to run a new continuous ground wire from the light to the breaker panel and that could be extremely difficult. That’s my understanding, confirm with a licensed electrician.
April 1, 2010 at 10:48 AM #534987georgeParticipantIf the light you are referring to is 120V underwater pool light, then be careful how the faulty wiring is repaired. You are not allowed by California building code to splice the the electrical ground wire connecting the underwater pool light to the electrical breaker panel. You must have a single continous ground wire. Not sure how a kink would interuppt electrical flow, but if the ground wire is severed or broken you won’t be able to legally add on a piece of wire between the break point and the light. It’s not just splicing with your your standard twist on connectors that’s prohibited, you can’t solder or permanantly crimp the wire either. You would have to run a new continuous ground wire from the light to the breaker panel and that could be extremely difficult. That’s my understanding, confirm with a licensed electrician.
-
AuthorPosts
- You must be logged in to reply to this topic.