- This topic has 65 replies, 8 voices, and was last updated 14 years ago by NotCranky.
-
AuthorPosts
-
December 2, 2010 at 10:09 AM #634759December 2, 2010 at 10:55 AM #635585NotCrankyParticipant
There are plenty of good windows. You are going to have to shop around before trying to drive the bargain anyway, so I won’t say this or that is better.
On the technical side make sure you get a window that has a slim enough profile that it doesn’t go beyond the plane of the drywall.
If it is paint grade I rip mdf down for the jamb trim and round it over with a 1/8 router bit then case it with pine or mdf.
Stating the obvious, same principle for stain grade, except use clear wood on both.
December 2, 2010 at 10:55 AM #635457NotCrankyParticipantThere are plenty of good windows. You are going to have to shop around before trying to drive the bargain anyway, so I won’t say this or that is better.
On the technical side make sure you get a window that has a slim enough profile that it doesn’t go beyond the plane of the drywall.
If it is paint grade I rip mdf down for the jamb trim and round it over with a 1/8 router bit then case it with pine or mdf.
Stating the obvious, same principle for stain grade, except use clear wood on both.
December 2, 2010 at 10:55 AM #634804NotCrankyParticipantThere are plenty of good windows. You are going to have to shop around before trying to drive the bargain anyway, so I won’t say this or that is better.
On the technical side make sure you get a window that has a slim enough profile that it doesn’t go beyond the plane of the drywall.
If it is paint grade I rip mdf down for the jamb trim and round it over with a 1/8 router bit then case it with pine or mdf.
Stating the obvious, same principle for stain grade, except use clear wood on both.
December 2, 2010 at 10:55 AM #634884NotCrankyParticipantThere are plenty of good windows. You are going to have to shop around before trying to drive the bargain anyway, so I won’t say this or that is better.
On the technical side make sure you get a window that has a slim enough profile that it doesn’t go beyond the plane of the drywall.
If it is paint grade I rip mdf down for the jamb trim and round it over with a 1/8 router bit then case it with pine or mdf.
Stating the obvious, same principle for stain grade, except use clear wood on both.
December 2, 2010 at 10:55 AM #635904NotCrankyParticipantThere are plenty of good windows. You are going to have to shop around before trying to drive the bargain anyway, so I won’t say this or that is better.
On the technical side make sure you get a window that has a slim enough profile that it doesn’t go beyond the plane of the drywall.
If it is paint grade I rip mdf down for the jamb trim and round it over with a 1/8 router bit then case it with pine or mdf.
Stating the obvious, same principle for stain grade, except use clear wood on both.
December 2, 2010 at 1:54 PM #634959mGandersParticipantWe put retrofit vinyl Simonton windows from Home Depot into our 1950’s home. Had them do the labor as well. They installed 9 windows for $5000 in one day. In regard to the comments about retrofits decreasing a homes value, I think that is all in the eye of the beholder. We were more interested in functionality, our home is small, and we are not the fancy nor rich type. We simply enjoy that they do a fantastic job insulating our home and making it much more cozy. They also look way better than our old windows.
You can get a $1500 rebate check from the government if you install up to $5000 of energy efficient windows before the end of the year.
My opinion…. if you have lots of money, dont mind construction mess, and want to make your house fancy, then do the full remodel. If you want new windows to keep your house warm and to give it a quick facelift, do the retrofits.
Have fun
December 2, 2010 at 1:54 PM #635660mGandersParticipantWe put retrofit vinyl Simonton windows from Home Depot into our 1950’s home. Had them do the labor as well. They installed 9 windows for $5000 in one day. In regard to the comments about retrofits decreasing a homes value, I think that is all in the eye of the beholder. We were more interested in functionality, our home is small, and we are not the fancy nor rich type. We simply enjoy that they do a fantastic job insulating our home and making it much more cozy. They also look way better than our old windows.
You can get a $1500 rebate check from the government if you install up to $5000 of energy efficient windows before the end of the year.
My opinion…. if you have lots of money, dont mind construction mess, and want to make your house fancy, then do the full remodel. If you want new windows to keep your house warm and to give it a quick facelift, do the retrofits.
Have fun
December 2, 2010 at 1:54 PM #635979mGandersParticipantWe put retrofit vinyl Simonton windows from Home Depot into our 1950’s home. Had them do the labor as well. They installed 9 windows for $5000 in one day. In regard to the comments about retrofits decreasing a homes value, I think that is all in the eye of the beholder. We were more interested in functionality, our home is small, and we are not the fancy nor rich type. We simply enjoy that they do a fantastic job insulating our home and making it much more cozy. They also look way better than our old windows.
You can get a $1500 rebate check from the government if you install up to $5000 of energy efficient windows before the end of the year.
My opinion…. if you have lots of money, dont mind construction mess, and want to make your house fancy, then do the full remodel. If you want new windows to keep your house warm and to give it a quick facelift, do the retrofits.
Have fun
December 2, 2010 at 1:54 PM #635531mGandersParticipantWe put retrofit vinyl Simonton windows from Home Depot into our 1950’s home. Had them do the labor as well. They installed 9 windows for $5000 in one day. In regard to the comments about retrofits decreasing a homes value, I think that is all in the eye of the beholder. We were more interested in functionality, our home is small, and we are not the fancy nor rich type. We simply enjoy that they do a fantastic job insulating our home and making it much more cozy. They also look way better than our old windows.
You can get a $1500 rebate check from the government if you install up to $5000 of energy efficient windows before the end of the year.
My opinion…. if you have lots of money, dont mind construction mess, and want to make your house fancy, then do the full remodel. If you want new windows to keep your house warm and to give it a quick facelift, do the retrofits.
Have fun
December 2, 2010 at 1:54 PM #634880mGandersParticipantWe put retrofit vinyl Simonton windows from Home Depot into our 1950’s home. Had them do the labor as well. They installed 9 windows for $5000 in one day. In regard to the comments about retrofits decreasing a homes value, I think that is all in the eye of the beholder. We were more interested in functionality, our home is small, and we are not the fancy nor rich type. We simply enjoy that they do a fantastic job insulating our home and making it much more cozy. They also look way better than our old windows.
You can get a $1500 rebate check from the government if you install up to $5000 of energy efficient windows before the end of the year.
My opinion…. if you have lots of money, dont mind construction mess, and want to make your house fancy, then do the full remodel. If you want new windows to keep your house warm and to give it a quick facelift, do the retrofits.
Have fun
December 2, 2010 at 3:45 PM #635586mike92104ParticipantGreat tips, thanks.
December 2, 2010 at 3:45 PM #635715mike92104ParticipantGreat tips, thanks.
December 2, 2010 at 3:45 PM #635014mike92104ParticipantGreat tips, thanks.
December 2, 2010 at 3:45 PM #634935mike92104ParticipantGreat tips, thanks.
-
AuthorPosts
- You must be logged in to reply to this topic.