Why Sears is doomed

[moneymaker]

Ok, I recently acquired a Sears Craftsman rototiller. Some goober stuck a bolt in where a shear pin should be. I go online to see if by chance Sears still sells parts, nope. So just out of curiosity, it’s a common part, I check out 4 similar models that they are now selling. The only one I can find parts for, a Briggs and Stratton, which by the way they are out of stock on, the pin is $2.55 and the cotter pin to hold it in is $2.54. So if I want to buy from them it’s going to be $10 for the 2 shear pins and cotters. I know everybody charges excessively for parts with car dealers being the notorious ones. Her’s the kicker though the other 3 rototillers you can’t even get parts for, so be very careful what you buy as everything from overseas is deemed disposable I guess.

P.S.- I guess it’s baleing wire for me.

[Casca]

JB Weld will change your life.

[Casca]

JB Weld will change your life.

[Casca]

JB Weld will change your life.

[Casca]

JB Weld will change your life.

[Casca]

JB Weld will change your life.

[CDMA ENG]

[quote=Casca]JB Weld will change your life.[/quote]

No truer words were ever spoken!

Besides the goverment cannot let SEARs fail! Where would men go while their wives shop?!?

😛

C.E.

[CDMA ENG]

[quote=Casca]JB Weld will change your life.[/quote]

No truer words were ever spoken!

Besides the goverment cannot let SEARs fail! Where would men go while their wives shop?!?

😛

C.E.

[CDMA ENG]

[quote=Casca]JB Weld will change your life.[/quote]

No truer words were ever spoken!

Besides the goverment cannot let SEARs fail! Where would men go while their wives shop?!?

😛

C.E.

[CDMA ENG]

[quote=Casca]JB Weld will change your life.[/quote]

No truer words were ever spoken!

Besides the goverment cannot let SEARs fail! Where would men go while their wives shop?!?

😛

C.E.

[CDMA ENG]

[quote=Casca]JB Weld will change your life.[/quote]

No truer words were ever spoken!

Besides the goverment cannot let SEARs fail! Where would men go while their wives shop?!?

😛

C.E.

[ucodegen]

Umm.. did you try this website?

http://www.searspartsdirect.com/partsdirect/index.action?psid=26128424&sid=PSx20071217x00001a

I have had no problems in the past getting parts for many of the Sears products.. What is the model number of the rototiller.

Note: In some cases, a bolt may be better than the normal sheer pin. Use a anti-vibration nut with a nylon end piece.

Depending upon type of tiller, model number may be between back wheels.

[ucodegen]

Umm.. did you try this website?

http://www.searspartsdirect.com/partsdirect/index.action?psid=26128424&sid=PSx20071217x00001a

I have had no problems in the past getting parts for many of the Sears products.. What is the model number of the rototiller.

Note: In some cases, a bolt may be better than the normal sheer pin. Use a anti-vibration nut with a nylon end piece.

Depending upon type of tiller, model number may be between back wheels.

[ucodegen]

Umm.. did you try this website?

http://www.searspartsdirect.com/partsdirect/index.action?psid=26128424&sid=PSx20071217x00001a

I have had no problems in the past getting parts for many of the Sears products.. What is the model number of the rototiller.

Note: In some cases, a bolt may be better than the normal sheer pin. Use a anti-vibration nut with a nylon end piece.

Depending upon type of tiller, model number may be between back wheels.

[ucodegen]

Umm.. did you try this website?

http://www.searspartsdirect.com/partsdirect/index.action?psid=26128424&sid=PSx20071217x00001a

I have had no problems in the past getting parts for many of the Sears products.. What is the model number of the rototiller.

Note: In some cases, a bolt may be better than the normal sheer pin. Use a anti-vibration nut with a nylon end piece.

Depending upon type of tiller, model number may be between back wheels.

[Author]

Posts