Home › Forums › Closed Forums › Buying and Selling RE › Should I fix this before I sell?
- This topic has 35 replies, 6 voices, and was last updated 13 years, 8 months ago by ucodegen.
-
AuthorPosts
-
March 14, 2011 at 3:41 PM #18628March 15, 2011 at 7:52 AM #677009MANmomParticipant
There is a very simple fix for this; there are screws specially designed that have a “double head”, like a small head with an additional mushroom head on top. You simply drive the screw into the subfloor, then using a tool like a screwdriver, you break off the mushroom head of the screw, leaving the first head in the subfloor and under the carpet and you can’t see it…simple fix! The screw is designed to break off and leave the rest of the screw in place. Good luck.
March 15, 2011 at 7:52 AM #677063MANmomParticipantThere is a very simple fix for this; there are screws specially designed that have a “double head”, like a small head with an additional mushroom head on top. You simply drive the screw into the subfloor, then using a tool like a screwdriver, you break off the mushroom head of the screw, leaving the first head in the subfloor and under the carpet and you can’t see it…simple fix! The screw is designed to break off and leave the rest of the screw in place. Good luck.
March 15, 2011 at 7:52 AM #677810MANmomParticipantThere is a very simple fix for this; there are screws specially designed that have a “double head”, like a small head with an additional mushroom head on top. You simply drive the screw into the subfloor, then using a tool like a screwdriver, you break off the mushroom head of the screw, leaving the first head in the subfloor and under the carpet and you can’t see it…simple fix! The screw is designed to break off and leave the rest of the screw in place. Good luck.
March 15, 2011 at 7:52 AM #677676MANmomParticipantThere is a very simple fix for this; there are screws specially designed that have a “double head”, like a small head with an additional mushroom head on top. You simply drive the screw into the subfloor, then using a tool like a screwdriver, you break off the mushroom head of the screw, leaving the first head in the subfloor and under the carpet and you can’t see it…simple fix! The screw is designed to break off and leave the rest of the screw in place. Good luck.
March 15, 2011 at 7:52 AM #678154MANmomParticipantThere is a very simple fix for this; there are screws specially designed that have a “double head”, like a small head with an additional mushroom head on top. You simply drive the screw into the subfloor, then using a tool like a screwdriver, you break off the mushroom head of the screw, leaving the first head in the subfloor and under the carpet and you can’t see it…simple fix! The screw is designed to break off and leave the rest of the screw in place. Good luck.
March 15, 2011 at 10:21 AM #677893LAAFTERHOURSParticipantI have the same problem and have the above mentioned “simple fix” screws and tools. The problem is finding the joists which i have been unsuccessful at. I have a pretty good (new) stud finder with deep scan but its impossible to find the joists and this tool mentions that you must screw into the joists to secure the wood planks below the carpet, tightening up the subfloor and eliminating the squeak. Maybe im doing something wrong.
March 15, 2011 at 10:21 AM #677757LAAFTERHOURSParticipantI have the same problem and have the above mentioned “simple fix” screws and tools. The problem is finding the joists which i have been unsuccessful at. I have a pretty good (new) stud finder with deep scan but its impossible to find the joists and this tool mentions that you must screw into the joists to secure the wood planks below the carpet, tightening up the subfloor and eliminating the squeak. Maybe im doing something wrong.
March 15, 2011 at 10:21 AM #678237LAAFTERHOURSParticipantI have the same problem and have the above mentioned “simple fix” screws and tools. The problem is finding the joists which i have been unsuccessful at. I have a pretty good (new) stud finder with deep scan but its impossible to find the joists and this tool mentions that you must screw into the joists to secure the wood planks below the carpet, tightening up the subfloor and eliminating the squeak. Maybe im doing something wrong.
March 15, 2011 at 10:21 AM #677145LAAFTERHOURSParticipantI have the same problem and have the above mentioned “simple fix” screws and tools. The problem is finding the joists which i have been unsuccessful at. I have a pretty good (new) stud finder with deep scan but its impossible to find the joists and this tool mentions that you must screw into the joists to secure the wood planks below the carpet, tightening up the subfloor and eliminating the squeak. Maybe im doing something wrong.
March 15, 2011 at 10:21 AM #677091LAAFTERHOURSParticipantI have the same problem and have the above mentioned “simple fix” screws and tools. The problem is finding the joists which i have been unsuccessful at. I have a pretty good (new) stud finder with deep scan but its impossible to find the joists and this tool mentions that you must screw into the joists to secure the wood planks below the carpet, tightening up the subfloor and eliminating the squeak. Maybe im doing something wrong.
March 15, 2011 at 10:38 AM #678242sdduuuudeParticipantI would guess it is probably be worth doing. If I were a buyer, I would notice that for sure and be worried.
Taking up carpet and putting the same carpet back down isn’t really all that costly for a professional installer.
Possible to get to it from underneath? Remove the drywall on the ceiling, put in glue and shim shingles. Maybe some johnson paste wax and a grease gun.
March 15, 2011 at 10:38 AM #677150sdduuuudeParticipantI would guess it is probably be worth doing. If I were a buyer, I would notice that for sure and be worried.
Taking up carpet and putting the same carpet back down isn’t really all that costly for a professional installer.
Possible to get to it from underneath? Remove the drywall on the ceiling, put in glue and shim shingles. Maybe some johnson paste wax and a grease gun.
March 15, 2011 at 10:38 AM #677762sdduuuudeParticipantI would guess it is probably be worth doing. If I were a buyer, I would notice that for sure and be worried.
Taking up carpet and putting the same carpet back down isn’t really all that costly for a professional installer.
Possible to get to it from underneath? Remove the drywall on the ceiling, put in glue and shim shingles. Maybe some johnson paste wax and a grease gun.
March 15, 2011 at 10:38 AM #677096sdduuuudeParticipantI would guess it is probably be worth doing. If I were a buyer, I would notice that for sure and be worried.
Taking up carpet and putting the same carpet back down isn’t really all that costly for a professional installer.
Possible to get to it from underneath? Remove the drywall on the ceiling, put in glue and shim shingles. Maybe some johnson paste wax and a grease gun.
-
AuthorPosts
- The forum ‘Buying and Selling RE’ is closed to new topics and replies.