- This topic has 70 replies, 9 voices, and was last updated 15 years, 1 month ago by
Operation.
-
AuthorPosts
-
October 13, 2010 at 6:05 PM #618639October 13, 2010 at 6:31 PM #617589
Vod-Vil
ParticipantThe tricky part is snaking the wire out of the panel and throughout the house.If the panel is located in the garage in close proximity to the laundry room,then getting the circuit over there will be easy.
You will need:
A new 30 amp 2 pole breaker $20.00
50′ 10/3 NM cable $75.00
30 amp receptacle $20.00
Junction box w/cover $5.00
2 NM connectors $3.00
Romex staples $3.00Total parts $126.00
[email protected] per hour x $320.00
4 hrsTotal cost $446.00
You could get this done for under $500.00
October 13, 2010 at 6:31 PM #617672Vod-Vil
ParticipantThe tricky part is snaking the wire out of the panel and throughout the house.If the panel is located in the garage in close proximity to the laundry room,then getting the circuit over there will be easy.
You will need:
A new 30 amp 2 pole breaker $20.00
50′ 10/3 NM cable $75.00
30 amp receptacle $20.00
Junction box w/cover $5.00
2 NM connectors $3.00
Romex staples $3.00Total parts $126.00
[email protected] per hour x $320.00
4 hrsTotal cost $446.00
You could get this done for under $500.00
October 13, 2010 at 6:31 PM #618219Vod-Vil
ParticipantThe tricky part is snaking the wire out of the panel and throughout the house.If the panel is located in the garage in close proximity to the laundry room,then getting the circuit over there will be easy.
You will need:
A new 30 amp 2 pole breaker $20.00
50′ 10/3 NM cable $75.00
30 amp receptacle $20.00
Junction box w/cover $5.00
2 NM connectors $3.00
Romex staples $3.00Total parts $126.00
[email protected] per hour x $320.00
4 hrsTotal cost $446.00
You could get this done for under $500.00
October 13, 2010 at 6:31 PM #618341Vod-Vil
ParticipantThe tricky part is snaking the wire out of the panel and throughout the house.If the panel is located in the garage in close proximity to the laundry room,then getting the circuit over there will be easy.
You will need:
A new 30 amp 2 pole breaker $20.00
50′ 10/3 NM cable $75.00
30 amp receptacle $20.00
Junction box w/cover $5.00
2 NM connectors $3.00
Romex staples $3.00Total parts $126.00
[email protected] per hour x $320.00
4 hrsTotal cost $446.00
You could get this done for under $500.00
October 13, 2010 at 6:31 PM #618659Vod-Vil
ParticipantThe tricky part is snaking the wire out of the panel and throughout the house.If the panel is located in the garage in close proximity to the laundry room,then getting the circuit over there will be easy.
You will need:
A new 30 amp 2 pole breaker $20.00
50′ 10/3 NM cable $75.00
30 amp receptacle $20.00
Junction box w/cover $5.00
2 NM connectors $3.00
Romex staples $3.00Total parts $126.00
[email protected] per hour x $320.00
4 hrsTotal cost $446.00
You could get this done for under $500.00
October 14, 2010 at 6:26 AM #617840Operation
Participant[quote=Vod-Vil]The tricky part is snaking the wire out of the panel and throughout the house.If the panel is located in the garage in close proximity to the laundry room,then getting the circuit over there will be easy.
You will need:
A new 30 amp 2 pole breaker $20.00
50′ 10/3 NM cable $75.00
30 amp receptacle $20.00
Junction box w/cover $5.00
2 NM connectors $3.00
Romex staples $3.00Total parts $126.00
[email protected] per hour x $320.00
4 hrsTotal cost $446.00
You could get this done for under $500.00[/quote]
Thanks to all for the timely information!
October 14, 2010 at 6:26 AM #617923Operation
Participant[quote=Vod-Vil]The tricky part is snaking the wire out of the panel and throughout the house.If the panel is located in the garage in close proximity to the laundry room,then getting the circuit over there will be easy.
You will need:
A new 30 amp 2 pole breaker $20.00
50′ 10/3 NM cable $75.00
30 amp receptacle $20.00
Junction box w/cover $5.00
2 NM connectors $3.00
Romex staples $3.00Total parts $126.00
[email protected] per hour x $320.00
4 hrsTotal cost $446.00
You could get this done for under $500.00[/quote]
Thanks to all for the timely information!
October 14, 2010 at 6:26 AM #618472Operation
Participant[quote=Vod-Vil]The tricky part is snaking the wire out of the panel and throughout the house.If the panel is located in the garage in close proximity to the laundry room,then getting the circuit over there will be easy.
You will need:
A new 30 amp 2 pole breaker $20.00
50′ 10/3 NM cable $75.00
30 amp receptacle $20.00
Junction box w/cover $5.00
2 NM connectors $3.00
Romex staples $3.00Total parts $126.00
[email protected] per hour x $320.00
4 hrsTotal cost $446.00
You could get this done for under $500.00[/quote]
Thanks to all for the timely information!
October 14, 2010 at 6:26 AM #618592Operation
Participant[quote=Vod-Vil]The tricky part is snaking the wire out of the panel and throughout the house.If the panel is located in the garage in close proximity to the laundry room,then getting the circuit over there will be easy.
You will need:
A new 30 amp 2 pole breaker $20.00
50′ 10/3 NM cable $75.00
30 amp receptacle $20.00
Junction box w/cover $5.00
2 NM connectors $3.00
Romex staples $3.00Total parts $126.00
[email protected] per hour x $320.00
4 hrsTotal cost $446.00
You could get this done for under $500.00[/quote]
Thanks to all for the timely information!
October 14, 2010 at 6:26 AM #618911Operation
Participant[quote=Vod-Vil]The tricky part is snaking the wire out of the panel and throughout the house.If the panel is located in the garage in close proximity to the laundry room,then getting the circuit over there will be easy.
You will need:
A new 30 amp 2 pole breaker $20.00
50′ 10/3 NM cable $75.00
30 amp receptacle $20.00
Junction box w/cover $5.00
2 NM connectors $3.00
Romex staples $3.00Total parts $126.00
[email protected] per hour x $320.00
4 hrsTotal cost $446.00
You could get this done for under $500.00[/quote]
Thanks to all for the timely information!
-
AuthorPosts
- You must be logged in to reply to this topic.
